250 C Temp Sensor lead pos 1 lead pos 2
inc VAT £399.17
Filter attachments
Throttle manifold size
Spun Ram Pipes set 4
Fuel Pump and filter


Throttle bodies and manifolds

Stainless fuel rails and clips


Crank Trigger Pulley

Air Filters

Wiring harness



Fuel Pressure Regulator

Coil Pack and Plug Wires

Air Temp- Engine Temp and  Throttle Position Sensors

ECU is pre loaded and tested with basic settings to suit injector size,sensors and ignition configuration
Available in 45mm 48mm 50mm 52mm with various filter and turbo attachments.
Manifolds are available with 2 core volumes the first is for the 45mm and the second has a 48mm opening and much larger cast ports at the head end.The 45mm size is more than enough for most street engines however if you have very large ports such as wedge port then the the larger manifold will make match porting much easier and some benefit may be had higher in the rev range.
This kit does not include fuel pump or fuel lines.
Fuel rails have a -6 male thread.
We can supply various  pumps fuel lines and fittings and/or advice on the requirements as there are too many options to list to cover every application.
If you intend to add a turbo at a later date then choose the 45mm option with turbo attacments and we can provide the 2 inch neck air filters instead of the 67mm . Turbo attachments are only available in 45mm at the moment .
The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu.